Genesis 3200 GSM
- MIG/MAG Pulsed - MMA - TIG DC HF Start
- Three-phase 3x230V-3x400V
- EasyArc is standard
- Wide selection of Selco wire feeder
- iPanel LCD control panel
Customers like it because:
High-quality and precise
mig/mag pulsed
QuickPulse 2.0 Compatible
TIG, MIG/MAG and MMA
all-in-one
-
Data sheet
General
Welding processes MIG/MAG - PULSED MIG/MAG - MMA - TIG DC HF - TIG DC Lift Materials Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing Dimensions 620x240x460mm Weight 27.6kg Power supply
Voltage (50/60 Hz) 3x400/230V±15% Maximum input power 13.0/13.3 kVA Maximum input current 18.8/32.9 A Power factor PF 0.95 Efficiency 85% Slow blow line fuse 20/30 A Open circuit voltage 75Vdc IP protection rate IP23S Insulation class H Power supply cable 4x4mm2 - 5m Welding
Adjustment range 3-320 A Duty cycle
MIG/MAG - 40 °C50% - 320A
60% - 310A
100% - 250ADuty cycleMIG/MAG - 25 °C70% - 320A100% - 270AØ Wire diameter (WF 4000) 1.0-1.2 mm (opz 0.6-1.6) Ø Fluxcoredwire (WF 4000) 1.2-2.4 mm Ø Aluminumwire (WF 4000) 0.8 -1.6 mm Wire speed (WF 4000) 0.5 - 22.0 m/min N° rolls (WF 4000) 2 (4 opz) Wire spool diameter (WF 3000 / WF4000) Ø 200/300mm Synergic program 60 Welding program memory location 64 U/D MIG/MAG torch compatible U/D TIG Torch compatible Digital Torch compatible PUSH PULL torch compatible Remote Control compatible RapiDeep 2.0 Compatible QuickPulse 2.0 Compatible EN 1090 Selco program compatible Weld@Net Selco compatible Standard EasyArc -
Applications
- Light job shop fabrication
- Medium-heavy job shop fabrication
- Building sites
- Shipyards
- Plants machinery construction
- Oil refinery plants construction
- Machine and apparatus construction
- Automobile industry
- Railway industry
- Nuclear industry
- Military industry
- Aeronautics and Aerospace industry
- Food industry
- Chemical industry
- Repair and overhaul
- Workshops
- Sheet metal working
-
Technicalities
- Green@wave" inverter technology for high energy efficiency and perfect control over all welding phases
- High power at 100% of duty cycle
- Heavy duty and enviromental conditions, high service life
- Selco CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
- Software based controls can be upgraded as new features become available
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. - power factor controller)
- Wire feeder unit (2/4 rolls drive)
- Fully Selco designed wire drive unit
- Full parameters control panel on wire feeder unit
- Ø 200/300 mm wire spool compatible
- Full digital and user-friendly LCD graphic display control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- User-defined welding program storage capability (64 free memory locations)
- Totally programmable user interface
- Programmable welding operations safety limits
- Lock-unlock function key protected by password
- Control of several welding units over Ethernet
- Totally welding process remote programming and management by PC network
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force, antisticking)
- Synergic setting for optimal stick welding with all types of electrodes
- Precise arc striking and high stability arc
- 2/4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start - motor slope)
- Burn-back and droplet detachment correction
- Crater filler operating mode
- Synergic operations from databank (60 pre-set programs)
- Wire speed (0,5-22,0 m/min), amperage and piece thickness adjustment
- Spot welding mode
- Intermittent welding mode
- MIG/MAG bilevel
- Digital TIG torch compatible
- Smart slope control
- Digital MIG/MAG torch compatible
- Push-pull torch device
- Remote control compatible
- Selco WU cooling unit compatible
- Controlled cooling operations
-
Accessories
- Default
- Title
- Date
- Random
-
-
-
-
-
-
Read More
ABIMIG W555D
Cooling
Liquid
Duty cycle Ar/CO2
100% 500 A
Wire diameter
0.8-1.6 mm
Cable
3/4 m
-
Read More
PP PLUS 401D
Cooling
Liquid
Duty cycle Ar/CO2
100% 350 A
Wire diameter
0.8-1.6 mm
Cable
4/8 m
-
Read More
ST2200
Cooling
Gas
DC Duty Factor
35% 220 A
Electrode diameter
0.5-4.0 mm
Cable
4/8 m
Versions
St/Up&Down/DigiTig
-
Read More
ST2500
Cooling
Liquid
DC Duty Factor
100% 250 A
Electrode diameter
0.5-4.0 mm
Cable
4/8 m
Versions
St/Up&Down/DigiTig
-
Read More
ST3000
Cooling
Liquid
DC Duty Factor
100% 300 A
Electrode diameter
0.5-4.0 mm
Cable
4/8 m
Versions
St/Up&Down/DigiTig
-
Read More
ST4000
Cooling
Liquid
DC Duty Factor
100% 400 A
Electrode diameter
0.5-4.0 mm
Cable
4/8 m
Versions
St/Up&Down/DigiTig
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Brochures
Instruction Manuals
Service Manuals
